Pico is a revolutionary New 100VA Digital Home UPS which is portable. Its user-friendly interface makes it ideal for small home appliances like the Laptop, CFLs, Mobile Charger, Table Fan, Radio etc. It is lightweight, easily mountable and consumes less space due to in-built battery feature. Pico is based on the latest & advanced Micro Controller based PWM technology using MOSFETs which facilitates optimal power usage.
The PICO Advantage
Pico is a compact 100VA UPS but with a vast application range. The Pico can take the load of a considerable amount of small home appliances like Laptop, CFLs, Mobile Charger, Table Fan, Radio, Weighing Scale,Modem etc. and run them without any interruption for upto 8 hrs.
-
Unmatched Back-up
The Pico provides uninterrupted and a longer back-up of upto 8 hrs.
-
Smart Battery
It is equipped with an in-built battery with over charging, high charging and deep discharge protection.
-
Superb safety
It protect appliances from unsafe and sudden power fluctuations.
-
Intelligent Power saving
The auto sleep feature minimizes battery use when the appliance is not connected to the UPS.
-
Up-to-date Technology
Based on the latest & advanced Micro Controller based PWM technology using MOSFETs which facilitates optimal power usage.
The PICO Applications
Pico is a compact 100VA UPS but with a vast application range. The Pico can take the load of a considerable amount of small home appliances like Laptop, CFLs, Mobile Charger, Table Fan, Radio, Weighing Scale,Modem etc. and run them without any interruption for upto 8 hrs.
Load Chart
| OPTION |
a |
b |
c |
d |
e |
f |
| Table Fan |
1 |
1 |
- |
- |
- |
- |
| Tube Light |
- |
- |
1 |
- |
- |
- |
| CFL* |
1 |
- |
2 |
2 |
1 |
6 |
| Laptop |
- |
- |
- |
1 |
1 |
- |
| Mobile Charger |
- |
1 |
- |
- |
1 |
- |
| APPLIANCES |
BACK-UP TIME |
| 1 CFL* |
upto 7.5 hrs |
| 3 CFLs* |
upto 3 hrs |
| 1 Laptop |
upto 3 hrs |
| 1 Table Fan |
upto 1.30 hrs |
| Table Fan + 1 CFL* |
upto 1 hr |
Note: Indicative values only, actual calculation depend on manufacturer's specification.
The PICO Edge
-
Power Switch
The power switch has to be ON while charging the battery or while using the system in the back-up mode.
-
AC Fuse
An AC fuse has been provided to counter overload.
-
UPS/W-UPS Mode Switch
An AC fuse has been A button enable users to switch from UPS mode (for sensitive appliances) to Wide UPS mode (for non-sensitive appliances).to counter overload.
-
Display (Front):
Mains ON/Battery Charging – Indicates that the system is in mains mode and the battery is being charged.
-
HUPS On/Battery Low
Indicates that the system is in UPS mode and battery is being used.The LED starts blinking when the battery's charge goes down.
-
Overload/Short-Circuit:
Indicates that the load is above the permissible limit or there is a short circuit.
-
Output Socket:
Output socket with a 5 pin point plug has been provided to use the UPS system for different applications i.e.Mobile charging, CFLs, Laptop charging, Modem, Radio, Table Fan, Wire extension etc.
-
Holder:
User can plug-in a CFL into the holder and use it as an emergency light too.
-
Power Cable:
Cable has been provided to charge the system anywhere anytime.
-
Handle:
Sturdy, metallic handle for easy transportability.
-
Easy-To-Handle
Light weight,portable and effortlessly mountable in 3 different position.
-
Inbuilt Battery:
7.2 AH SMF in-bulit battery for power back-up (Plug in of CFL)