Power Solutions

Sinclair-I Series

Sinclair
Salient Features
  • Microcontroller based High Frequency design using IGBT
  • Active Power Factor Correction with input power factor > 0.98 for 10% to 100% load
  • Reduced hardware for increased reliability
  • High efficiency in both Mains and Battery Modes
  • Extra wide Input Voltage window range minimizing battery usage and enhancing battery utilization and life
  • Noiseless operation
  • SMPS Based Pure DC Charger with extended power, extended battery life and lower maintenance cost
  • Inbuilt static bypass
  • High crest factor, handles all high-inrush current loads without need for power rating upgrade
  • Multiple protection features to ensure load safety
  • DC-start function
  • User friendly LCD display
  • Heavy duty charger for long backup
  • Parallel redundancy is available in 6 and 10KVA
  • SNMP monitoring (optional)
Choice of Power
Sinclair-I UPS is available in two variants -

  • With External Battery (1-10KVA) for more backup
  • With Internal Battery (1-10KVA) for less backup
Sinclair
Product Catalogue Product Enquiry
TECHNICAL SPECIFICATIONS
Type 1 Phase Input -1 Phase Output
Series Sinclair-i
Technology High Frequency Online UPS
MODEL Sinclair-i
Capacity 1kVA IB 1kVA EB 2kVA IB 2kVA EB 3kVA IB 3kVA EB 6kVA IB 6kVA EB 10kVA IB 10kVA EB
INPUT PARAMETERS
No. of Phases 1Phase-3Wire (P,N,E)
Voltage Range 110-300Volts ± 5Volt(Load dependant) 176 -276Volts ± 5Volt
Input Power Factor >0.97 at Full Load >0.98 at Full Load
Input Frequency Range 46 to 54Hz.
OUTPUT PARAMETERS
Power 700 W 1400 W 2100 W 4200 W 7000 W
Load PF Range 0.65 lagging to 1.0
Phase 1 Phase -3 Wire (P,N,E)
Output Waveform Pure Sine Wave
Voltage 220/230/240VAC ± 2% ( selectable )
Frequency Synchronization Range 46-54Hz, Slew Rate 1Hz/Sec, Battery Mode (50±0.2) Hz
Load Crest Factor > 3:1
Output Voltage THD <=3% on Resistive full load
Loading Capacity 110% 150%: for 0.5s fault after 30s, 105% 130%: Transfer to bypass after 10 min.
  >150%: fault after 300ms, >130%: Transfer to bypass after 1s, shutdown after
auto recovery 1 min.(Line mode)
BY-PASS
Maintenance By-Pass Static By-Pass
BATTERIES
No. of 12V Batteries 3 8 8 20 20
Voltage 36VDC 96VDC 96VDC 240VDC 240VDC
Charging Current 1A (8±1)A 1A (8±1)A 1A (8±1)A 2A (4.2±0.2)A 2A (4.2±0.2)A
GENERAL
Indication LCD panel
Alarm Mains Failure, Battery Low, Over Load & Short Circuit
Protection Short Circuit, Over Voltage & Under Voltage Protection
Cooling Forced Air Cooling
UPS Efficiency 85% 85% 85% 88% 88%
Operating Temperature 0-45DegC
Operating Humidity 95% Condensing
Monitoring Software Additional Software available for remote monitoring
Accoustic Noise <=45db at 1 Metre
UPS Weight (With Batteries) 13.3kg 7 kg 32 kg 15 Kg 32.2 Kg 14.5 Kg 84 kg 35 kg 93 kg 38 kg
Dimension (W x D x H) (145 x 220 x 400)mm (195 x 330 x 455)mm (195 x 330 x 455)mm (260 x 717 x 570)mm (260 x 717 x 570)mm
Where all can I use Su-Kam Online UPS?
The Su-Kam Online UPS can be used for a variety of applications, where reliable power backup plays an important role. These include:

  • Offices, Workstation and Lan Servers
  • Medical Equipment
  • Air Traffic Control System
  • Satellite System
  • Telecommunication System
  • ATM Machines
  • Colour Labs
  • Embroidery Machines
  • Plotters
  • Point of Sale Systems (POS)
  • Offices
  • Security Systems / Control Room

PCs, Workstations, Computer Labs, IT Networks, Internet Nodes/Servers, Plotters, Monitors & Modems, Security Equipment, EPABX Systems, Fax Machines, Networking Products, Point of Sale (POS) Systems, Cash Registers, ATM Machines, SOHO (Small Office Home Office), Data Centres/Offices, Industrial Equipment, Security Systems, Overhead Projector, Local Area Networks (LAN), Telecommunication Systems, Electrical Medical Equipment, Biomedical Equipment, Satellite Systems, Industial Computer-based Machines, Studio Equipment, Video Equipment, Sound Equipment, Printing & Media Equipment, Small Automation Control Equipment, Sensitive electronic or any other computerized systems, Access Control System, and many more.