Power Solutions

Connecto

Get To Know the FABULOUS CONNECTO 2.5 KVA

The Connecto 2.5 KVA is a technological breakthrough, bringing you the only inverter of this capacity with internal batteries.

This gives you the incomparable advantage of connecting it to your diesel genset. When the mains fail, the inverter takes on the entire load, until the genset is switched on. Result?

Smooth switchovers, with no blackout whatsoever. You won’t even notice that the power supply has failed.

For shops, offices, factories and other institutions, this means no loss in productivity, no loss in business, while protecting sensitive equipment.


A Powerful Friend for Every Appliance

Connecto is a 2.5 KVA / 48 V system that can run all IT hardware and the usual appliances found in homes and offices. Requiring four batteries, Connecto can run as many as 10 computers and printers simultaneously. It is a two-in-one system that eliminates the need to have separate power back-up solutions for computers and other appliances. The switchover between mains and battery is instant.

Connecto is powered by the most advanced micro controller based PWM technology, using MOSFETs, which facilitates optimum power consumption. It safeguards even the most sensitive appliances from unsafe power conditions like
Product Catalogue Product Enquiry

PROTECT TOUR VALUABLE APPLIANCES AND ENJOY NON-STOP POWER.



Cut Down Your Electricity Bills

With the highest Power Factor in this range that ensures optimal power consumption, the Connecto helps you save up to 25% of your electricity bills. Your Connecto can soon pay for itself!

Automatic Low Battery Protection

When in the battery mode, the system checks the batteries to protect them from deep discharge and alerts you with a buzzer sound.

IMPROVES BATTERY LIFE

Fuzzy Logic Control based charging technology regulates the charging process and improves battery life substantially. This is Sukam’s patented technology.

For Highest Efficiency

With the world’s most trusted micro controller based technology using MOSFETs, Connecto improves the efficiency of the entire system and provides clean, efficient power to all your appliances.

No Load Shutdown

If the load is less than 10 W, the system shuts down automatically after 2 minutes, which reduces the dependence on the battery back-up.

Smart Overload Protection

  • Protects the system from breakdowns in the battery mode.
  • Auto reset alarm re-try 4 times.
  • The system shuts down if the load is not reduced after 8 resets.

Smart Short Circuit Protection

  • Protects the system from short circuits.
  • Auto reset alarm re-try 4 times.
  • The system shuts down after 4 resets.

Battery Overcharge Protection

  • Protects batteries from getting overcharged.
  • Stops charging if the total DC voltage goes above 60 V.

Phase to Phase Voltage Protection

Protects the appliances and the system components in case of phase reversal.

Can Withstand High Surges

Can withstand high surges up to 300% of its actual capacity.

CONNECTO CREATED WITH YOU IN MIND

  • Four In-built Batteries

    Connecto comes with four inbuilt batteries, so you need have no worries about finding the right batteries for your system. These are sealed, maintenance-free batteries – so no pollution, no maintenance, no fears of leakage. And no extra space needed to store the batteries. It is a neat, compact system, very easy to install. Designed to be aesthetically pleasing, it does not detract from the décor of your home or office.

  • Graphical Displays

    User-friendly graphical displays that clearly show you the exact running condition of the system. Mains On
    This indicates that the system is in the Mains Mode and the batteries are being charged.

    Inverter On
    This indicates that the system is in the UPS mode, providing back-up through the batteries and that the batteries are being discharged.

    Battery Low
    This indication is accompanied by a buzzer sound, alerting you that the batteries have been used to their full capacity. After a few minutes, when the batteries get fully discharged, the system shuts down automatically.

    Overload
    This indicates that the load is above the permissible limit in the battery mode or there is a short circuit. The system resets itself and makes 4 attempts in case of overload, to keep functioning.
  •  

    UPS Mode / Wide UPS Mode

    There is a slider switch that allows you to choose between UPS Mode, for sensitive appliances and Wide UPS Mode, for non-sensitive appliances

  • MCB (Miniature Circuit Breaker)

    This protects the system and the appliances from harmful distortions in the power supply and from short circuits. The Connecto has two MCBs – one for the mains supply and one for the battery supply. This ensures that the batteries do not get discharged when the system is in transit or in an idle state. This reduces the frequency of charging and enhances battery life.

  • MCB (MINIATURE CIRCUIT BREAKER)

    In the unlikely event of a breakdown, you can turn the system off with the Rotary Switch placed at the rear. This protects the system and the battery back-up.

Connecto Application

  • Small Offices
  • Cyber Cafés
  • Multiplexes
  • Cinema Halls
  • Public Libraries



Household Appliances

  • Fans
  • Tube lights/CFLs
  • LCD Tvs
  • Pc’s
  • Motors



Office and IT Equipment

  • 10 computers with T.F.T Screen
  • Currency Counting Machine
  • 8 computers with C.R.T Screen
  • Projector
  • Printer
  • Security System (card punching, self identification)
  • Scanner

Load Chart

Load Back-UP
34 Tube-Light 3-4 Minute
5 Computers with C.R.T monitor+ 4 Computers with T.F.T monitor+ 2 Fan + 2 C.F.L 3-4 Minute
10 Computers with T.F.T Monitor 5-6 Minute
7 Fan + 7 Tube Light + 1 P.C 4-5 Minute
7 Computers with C.R.T Monitor + 2 Fan + 2 C.F.L 3-4 Minute
Note: Indicative values only, actual calculations depend on manufacturer's specifications
Tube light of 40W, CFL of 15W, 48mm Ceiling Fan (3-blades, 1000-1200 sweep)